Dr. Mohammod Jahirul Haque Munshi

Associate Professor

Department of Mathematics
Faculty of Science, Engineering & Technology


Research Interest

Computational Fluid Dynamics (CFD), Numerical and analytical techniques of solving Applied Mathematical and Engineering problems. Boundary layer flows and Cavity flows Flow in enclosures and

Employee ID: 110006
Mobile No: +8801819274767
Email: drmunshi@hamdarduniversity.edu.bd
Nationality: Bangladeshi
Date of Birth: 1976-01-01
Joining Date: 2012-10-01

  • Ph.D. in Mathematics (Nano Fluid Dynamics)
  • M.Phil. in Mathematics
  • M.Sc. in Mathematics
  • B.Sc. (Honours) in Mathematics

Previous Experience:

  • Associate Professor, Department of Mathematics, Hamdard University Bangladesh (HUB), Hamdard Nagar, Gazaria, Munshiganj-1510, Bangladesh(from  December 29, 2019 - till now.);
  • Assistant Professor, Department of Mathematics, Hamdard University Bangladesh (HUB), Hamdard Nagar, Gazaria, Munshiganj-1510, Bangladesh (from January 2018- December 28, 2019);
  • Lecturer, Department of Mathematics, Hamdard University Bangladesh (HUB), Hamdard Nagar, Gazaria, Munshiganj-1510, Bangladesh (from October 2012 – December 2017);
  • Assistant Professor, Department of Mathematics, Bangladesh Institute of Science and Technology (BIST, University level Institute), Dhaka (from January 2006- September 2012);
  • Lecturer, Department of Mathematics, Bangladesh Institute of Science and Technology (BIST, University level Institute), Dhaka (from January 2003- December 2005);
  • Lecturer, Department of CSE, BBA, Synergy Institute of Management & Information Technology (SIMIT, University level Institute), Dhaka (from January 2001- December 2002);
  • Teaching Assistant, Department of Mathematics, Bangladesh University of Engineering and Technology (BUET) Dhaka-1000, Bangladesh (from April 2009- April 2011);
  • Faculty Member (Part time);  Sheak Borhunuddin Post Graduate College and Atish Dipankar University of Science & Technology (ADUST);
  • Regular Examiner; (Question paper setter, Moderator and Scrutinizer) National University, Gazipur, Bangladesh (from 2004-2014 );

List of Publications (National and International):

  1. M. Jahirul Haque Munshi, A. H. Bhuiyan, M. A. Alim, K. F. U. Ahmed, “A Numerical Study of Natural Convection in a Square Enclosure with NonUniformly Heated Bottom Wall and Triangular Shape Heated Block”, Journal of Hamdard University Bangladesh (ISSN 2409-9627), Vol. 2, No. 1, pp. 75- 89, September 2015.
  2. M. Jahirul Haque Munshi, M. A. Alim, “Hydro-magnetic natural convection flow in a square cavity with internal heat generation elliptic shape heated block”, Journal of Hamdard University Bangladesh (ISSN 2409-9627), Vol. 2, No. 2, December 2015.
  3. M. M. Billah, M.J.H. Munshi, A.K. Azad, M.S. Uddin, M.M. Rahman, “Numerical simulation of magneto-hydrodynamics mixed convection in an open channel having a semi-circular heater”, Journal of Naval Architecture and Marin Engineering, vol. 9, pp. 1- 10, December, 2012. DOI: 10.3329/jname.v9i2.8020
  4. A. K. Azad, M. J. H. Munshi, M. M. Rahman, and M. K. Chowdhury, “Analysis of Combined Convection in an Open Cavity under Constant Heat Flux Boundary Conditions and Magnetic Field Using Finite Element Method”, Journal of Scientific Research, J. Sci. Res. 6 (2), 243-256 (2014).
  5. M. Jahirul Haque Munshi, M. A. Alim, “Effect of a Magnetohydrodynamic Free Convection in a Square Cavity with internal Elliptic Shape Heated Block”, Bangladesh Journal of Physics (BJP) - Bangladesh Physical Society, vol. 20, 2016.
  6. M. Jahirul Haque Munshi, M. A. Alim, “Effect of Hydromagnetic Mixed Convection Double Lid Driven Square Cavity with Inside Elliptic Heated Block”, Journal of Scientific Research, vol. 9, no. 1, pp. 1- 11, 2016, www.banglajol.info/index.php/JSR
  7. M. Jahirul Haque Munshi, M. A. Alim, M. Ali, M. Shadul Alam, “A Numerical Study of Mixed Convection in Square Lid-Driven with Internal Elliptic Body and Constant Flux Heat Source on the Bottom Wall”, Journal of Scientific Research, vol. 9, no. 2, pp, 145-158, 2017, www.banglajol.info/index.php/JSR.
  8. M. Jahirul Haque Munshi1* ,M. A. Alim2 ,A. H. Bhuiyan2 , “Magnetohydrodynamicmixed convection in a lid-driven porous square cavity with internal elliptic cold block and linearly heated side walls”, BAUET JOURNAL, Published by Bangladesh Army University of Engineering & Technology, vol. 01, no. 01, pp. 101-111, 2017.
  9. Abdul Halim Bhuiyan1* , M. Jahirul Haque Munshi2 , “Hydrodynamic Mixed Convection I a lid-driven Porous Square cavity with internal heat generating elliptic block, GANIT J. Bangladesh Math. Soc. (ISSN 1606-3694), vol. 37, pp. 175- 183, 2017.
  10. M. Jahirul Haque Munshi1* , Mahamuda Akter1 , Mahtab Uddin Ahmmed2 “Magnetohydrodynamic free convection in a triangular cavity with internal circleshape heated block”, Journal of Hamdard University Bangladesh (ISSN 2409- 9627), Vol. 4, No. 1, pp. 189- 206, June 2018.
  11. M. Jahirul Haque Munshi, A. H. Bhuiyan, M. A. Alim, “A Numerical Study of Natural Convection in a Square Enclosure with Non-Uniformly Heated Bottom Wall and Square Shape Heated Block”, American Journal of Engineering Research (AJER) e-ISSN: 2320-0847 p-ISSN: 2320-0936 Volume-4, Issue-5, pp-124-137, 2015.
  12. M. Jahirul Haque Munshi, M. A. Alim, A. H. Bhuiyan, G. Mostafa, “Effect of aMagneto-hydrodynamic Natural Convection in a Square Cavity with Elliptic Shape Adiabatic Block”, American Journal of Engineering Research (AJER) e-ISSN: 2320-0847 p-ISSN: 2320-0936 Volume-4, Issue-7, pp-10-22, 2015.
  13. M. Jahirul Haque Munshi, M. A. Alim, A. H. Bhuiyan,“A Numerical Study of Magnetohydrodynamic Free Convection in a Square Cavity with Heated Elliptic Block”, American Institute of Physics (AIP),1754, 040022, pp. 1-7, 2016; doi:10.1063/1.4958382(SCOPUS)
  14. M. Jahirul Haque Munshi, M. A. Alim, A. H. Bhuiyan, G. Mostafa, “A Numerical study of mixed convection in square lid-driven with internal elliptic body and constant flux heat source on the bottom wall”, International Journal of Engineering and Applied Sciences (IJEAS), ISSN: 2394-3661, Volume-3, Issue-6, pp. 42- 49, June 2016.
  15. M. J. H. Munshi, A.K. Azad, R.A. Begum, M.B. Uddin, and M.M. Rahman, “Modeling and simulation of mhd convective heat transfer of channel flow having a cavity”, International Journal of Mechanical and Materials Engineering (IJMME) (ISSN 1823-0334) Index by Scopus, Vol. 8, No. 1, Page: 63-72, 2013.
  16. A.K. Azad, M.J.H. Munshi, M.M. Rahman, “Double diffusive mixed convection in a channel with a circular heater”, Procedia Engineering, Science Direct, 56(2013), pp. 157- 162. doi: 10.1016/j.proeng.2013.03.102, Published by Elsevier Ltd. (SCOPUS)
  17. M. M. Billah, M.J.H. Munshi, A.R. Khan, A. Rashid, and M.M. Rahman, “Mathematical modeling for heat transfer enhancement in a ventilated enclosure with a circular heat-generating block”, Engineering e-Transaction (ISSN 1823-6379) vol. 7, no. 2, pp 54-61, December 2012. (SCOPUS)
  18. M. Jahirul Haque Munshi, M. A. Alim, A. H. Bhuiyan, M. Ali, “Hydrodynamic Mixed Convection in a lid- driven square cavity including heat conducting elliptic cylinder with corner heater”, Procedia Engineering, Science Direct, 194(2017), pp. 442- 449, Published by Elsevier Ltd. (SCOPUS) 
  19. M. Jahirul Haque Munshi,M. A. Alim, A. H. Bhuiyan, M. Ali,“Optimization of Mixed convection in a lid-driven porous square cavity with internal elliptic shape adiabatic block and linearly heated side walls”, American Institute of Physics (AIP),1851, 020049; doi: 10.1063/1.4984678, 2017. (SCOPUS)
  20. Golam Mostafa, M. Jahirul Haque Munshi, Sumon Hossain, and M. Ali, “Analysis of natural convection flow characteristics in a square cavity with internal elliptic shape block”, American Institute of Physics (AIP),1851, 020050; doi: 10.1063/1.4984679, 2017. (SCOPUS)
  21. M. S. Alam, M. Ali, M. A. Alim, and M. J. Haque Munshi, “Unsteady boundary layer nanofluid flow and heat transfer along a porous stretching surface with magnetic field”, American Institute of Physics (AIP),1851, 020023; doi: 10.1063/1.4984652, 2017. (SCOPUS)
  22. M. S. Alam, M. Ali, M. A. Alim, M. J. Haque Munshi, M. Z. Uddin Chowdhurye, “Solution of Falkner- Skan Unsteady MHD Boundary Layer Flow and Heat Transfer past a Moving Porous Wedge in a Nanofluid”, Procedia Engineering, Science Direct, Published by Elsevier, 2017. (SCOPUS)
  23. M. Jahirul Haque Munshi1* ,M. A. Alim2 , Mahtab Uddin Ahmmed3 , A Numerical study of mixed convection in a lid-driven porous square cavity with internal elliptic block and linearly heated side walls, International Journal of Statistics and Applied Mathematics, vol. 3(3), pp. 191-202, 2018.
  24. M. Jahirul Haque Munshi1* , Golam Mostafa1, A. B. S. Manik Munsi, Md. Waliullah, Hydrodynamic Mixed Convectionin a Lid-Driven Hexagonal Cavity with Corner Heater, American Journal of Computational Mathematics, vol. 8, pp. 245-258, 2018. (SCOPUS)
  25. M. Fayz-Al-Asad, M. M. A. Sarker, M. J. H. Munshi, Numerical Investigation of Natural Convection Flow in a Hexagonal Enclosure Having Vertical Fin, Journal of Scientific Research, vol. 11, no. 2, pp, 173-183, 2019, www.banglajol.info/index.php/JSR
  26. Md. Fayz-Al-Asad, M. Jahirul Haque Munshi, Rajib Kumer Bhowmik, M. M. A. Sarker, MHD Free Convection Heat Transfer Having Vertical Fin in a Square Wavy Cavity, International Journal of Statistics and Applied Mathematics, vol. 4(1), pp. 191-202, 2019.
  27. M. Jahirul Haque Munshi, Nusrat Jahan, Golam Mostafa, Mixed Convection Heat Transfer of Nanofluid in a Lid-Driven Porous Medium Square Enclosure with Pairs of Heat Source-Sinks, American Journal of Engineering Research (AJER) e-ISSN: 2320-0847 p-ISSN: 2320-0936 Volume-8, Issue-6, pp-59-70, 2019.
  28. M. Jahirul Haque Munshi, M. A. Alim, A. H. Bhuiyan, K. F. U. Ahmed, Numerical simulation of mixed convection heat transfer of nanofluid in a liddriven porous medium square enclosure, American Institute of Physics (AIP), 2121, 030005 (2019); https://doi.org/10.1063/1.5115850 (SCOPUS)
  29. Abdul Halim Bhuiyan, M. Jahirul Haque Munshi, M. A. Alim, Md. Shahidul Alam, MHD Effect on Mixed Convection Heat Transfer of Cu-Water Nanofluid in a Vented Parallelogrammic Cavity with Injection or Suction, American Institute of Physics (AIP), 2121, 070008 (2019); https://doi.org/10.1063/1.5115915. (SCOPUS)
  30. M. Humaun Kabir, M. Jahirul Haque Munshi, Nazma Parveen, Numerical Study of MHD Mixed Convection Heat Transfer of Nanofluid in a Lid-driven Porous Rectangular Cavity with Three Square Heating Blocks, American Institute of Physics (AIP), 2121, 070002 (2019); https://doi.org/10.1063/1.5115909 (SCOPUS)
  31. Aysharjya Sarkar, M. A. Alim, M. Jahirul Haque Munshi, M. M. Ali, Numerical Study on MHD Mixed Convection in a Lid Driven Cavity with a Wavy Top Wall and Rectangular Heaters at the Bottom, American Institute of Physics (AIP), 2121, 030004 (2019); https://doi.org/10.1063/1.5115849 (SCOPUS)
  32. M. Jahirul Haque Munshi, Nusrat Jahan, K. F. U. Ahmed, MHD effect on free convection heat transfer in a C-shaped cavity, BUFT Journal, vol. 5, pp. 7- 16, ISSN 2306-045X, July, 2019.
  33. Md. Shahidul Alam, Md. Shirazul Hoque Mollah, Md. Abdul Alim, Mohammad Mokaddes Ali, and M. Jahirul Haque Munshi, Effect of Rayleigh number magnetoconvection in a lid driven square cavity with a sinusoidal wall, American Institute of Physics (AIP), 2121, 030021 (2019); https://doi.org/10.1063/1.5115866. (SCOPUS)
  34. Md. Fayz-Al-Asad, M. Jahirul Haque Munshi, Md. Manirul Alam Sarker, Effect of Fin Length and Location on Natural Convection Heat Transfer in a Wavy Cavity, International Journal of Thermofluid Science and Technology,vol.7,Issue3, 070303, https://doi.org/10.36963/IJTST.2020070303, 2020.
  35. M. Ali, M. A. Alim, R. Nasrin, M. S. Alam, M. J. Haque Munshi, Similarity Solution of Unsteady MHD Boundary layer flow and heat transfer past a moving wedge in a Nanofluid using the Buongiorno Model, Procedia Engineering, ELSEVIER, vol. 194, pp. 407- 413, 2017. (SCOPUS)
  36. M. Jahirul Haque Munshi, M. A. Alim, Raju Chowdhury, Magnetohydrodynamic Mixed Convection in a Double Lid driven Porous Square Enclosure Filled with Copper-water Nanofluid with Heat Generating Elliptic Block, American Institute of Physics (AIP), 1980, 050009 (2018); doi: 10.1063/1.5044345. (SCOPUS)
  37. M. Jahirul Haque Munshi1* , K. F. U. Ahmed3 , M. Sajjad Hossain2 , M. A. Alim3 , Numerical simulation of MHD Mixed convection heat transfer of nanofluid in a lid-driven porous medium C-Shaped enclosure, American Institute of Physics (AIP), MS ID: AIPCP20-AR-ICME2019-00074, 2020 (SCOPUS)
  38. M. Jahirul Haque Munshi1* , J. R. M. Borhan 2 , Anamika Chowdhury3 , Ikramul Islam Sayem4 , Numerical Simulation Of MHD Effects On Natural Convection In A U-Shaped Enclosure, Journal of Hamdard University Bangladesh, vol. 5. No. 1, pp. 69- 86, 2019.
  39. Md. Jahirul Haque Munshi, Md. Siful Islam, Md. Rasel Rana Khandaker, Md. Sajjad Hossain, Simulation of Nanofluid Flow in Porous Square-Shaped Enclosures, Journal of Scientific Research (JSR) , Vol. 15 (2), pp. 383-399, 2023. doi: http://dx.doi.org/10.3329/jsr.v15i2.61667
  40.  Md. Jahirul Haque Munshi, Rathindra Chandra Gope, Md. Siful Islam, Mir Mohammad Azad, Heat Transfer of Nanofluid in a Porous Medium U-shaped enclosure: Numerical Investigation, Jilin Daxue Xuebao (Gongxueban), Journal of Jilin University, Vol. 42 Issue: 04-2023, pp. 535-548, 2023. DOI http://dx.doi.org/10.17605/OSF.IO/Y5U6M   (SCOPUS)

  41. Mohammad Mahfuzul Islam, Md. Abdul Alim, Md. Mahmud Alam, Md. Jahirul Haque Munshi, Simulation of Natural Convection Flow with Magneto-Hydrodynamics in a Wavy Top Enclosure with a Semi-Circular Heater, Open Journal of Applied Sciences (Scientific Research Publishing), Vol.13, pp. 591- 603, 2023. DOI: 10.4236/ojapps.2023.134047 (Scientific Research Publishing)

  42. Harun-Or-Roshid, Md Mamunur Roshid, Mohammad Mobarak Hossain, M S Hasan, Md Jahirul Haque Munshi, Anamul Haque Sajib, Dynamical structure of truncated M− fractional Klein–Gordon model via two integral schemes, Results in Physics (Elsevier) Science Direct, Volume 46, March 2023, 106272,     http://dx.doi.org/10.1016/j.rinp.2023.106272     (SCOPUS)

  43. Md. Abdullah Al Mahmud, Md. Jahirul Haque Munshi, Md. Siful Islam, Md. Jamiul Islam, Md. Abdul Mannan, Md. Mehedi Hasan, Numerical simulation of heat transfer in a wavy enclosure with and without the presence of fins, Asian Research Journal of Mathematics, Volume 19, Issue 9, Page 95-104, 2023.  DOI: https://doi.org/10.9734/arjom/2023/v19i9702

  44. Md. Rasel Rana Khandaker, Mohammod Jahirul Haque Munshi*, Md. Mahmud Alam, Md. Jamiul Islam, Md. Abdullah Al Mahmud, Md. Siful Islam, The Impact of Nanofluid Flow in a Rhombus-Shaped Porous Enclosure on a Constant Heated Obstacle, European Journal of Mathematics and Statistics, Vol 4, Issue 6,  pp. 1-12, November 06, 2023. DOI: 10.24018/ejmath.2023.4.6.245

  45. Sree Pradip Kumer Sarker, Mohammad Mahmud Alam, Mohammod Jahirul Haque Munshi, Simulating Mixed Convection in a Lid-Driven Wavy Enclosure with Block in Different Locations, International Journal of Fluid Mechanics & Thermal Sciences, 9(2), 20-28, December 11, 2023.DOI: https://doi.org/10.11648/j.ijfmts.20230902.11 (SciencePG)

  46. Sree Pradip Kumer Sarker, Md. Mahmud Alam, Md. Jahirul Haque Munshi, Modeling of Mixed Convection in a Lid Driven Wavy Enclosure with Two Square Blocks Placed at Different Positions, Journal of Applied Mathematics and Physics, Vol. 11, No. 12, pp. 3984-3999, December 27, 2023. DOI: https://doi.org/10.4236/jamp.2023.1112255 (Scientific Research Publishing).

  47. Md Jahirul Haque Munshi*, Fatema Akter, Md Abdullah Al Mahmud, and Md Abdul Mannan, Numerical Modeling of Mixed convection heat transfer in a double-driven enclosure, Journal of Hamdard University Bangladesh, ISSN 2409-9627,  Vol.  8, No. 1 & 2 (2022), pp. 47- 57,  December 16,  2023. https://drive.google.com/file/d/12YtRQbkqIhrKzLBmkNtW8haAWduqNfAR/view?usp=sharing

  48. Sayeda Sadia Billah, Muhammad Sajjad Hossain, Md. Fayz-Al-Asad, Muhammad Saiful Islam Mallik, Sreebash Chandra Paul, Md. Jahirul Haque Munshi, and Md. Manirul Alam Sarker, Free convection at different locations of adiabatic elliptic blockage in a square enclosure, Mathematical Modeling and Numerical Simulation with Applications, 2024, 4(1), 86–109, Published: 31.03.2024. https://dergipark.org.tr/en/pub/mmnsa, https://doi.org/10.53391/mmnsa.138251

  49. Hamida Akter, Nazma Parveen, M. Jahirul Haque Munshi & Tarikul Islam, MHD Mixed Convection of Nanofluid in a Lid-Driven Porous Trapezoidal Cavity with a Heated Obstacle. Multiscale Sci. Eng., Springer Nature, 2024. Published18 April 2024.  https://doi.org/10.1007/s42493-024-00113-x

  50. M. J. Islam, M. M. Ali, M. M. Miah, M. J. H. Munshi, Numerical Study of Magnetohydrodynamic Free Convection in a Rectangular Cavity with Corner Heater Having a Triangular Obstacle, Journal of Scientific Research, J. Sci. Res. 16 (2), 493-505 (2024). doi: https://dx.doi.org/10.3329/jsr.v16i2.68713

     

 

Scientific Conferences: Presentation of Research Papers

  1. A.K. Azad, M.J.H. Munshi, M.M. Billah and M.M. Rahman, (2012). Finite Element Analysis on MHD Mixed Convection in a Lid-Driven Cavity with Semi-Circular Heater, 5th BSME International Conference on Thermal Engineering, 21-23 Dec., Dhaka, Bangladesh.
  2. A.K. Azad, M.J.H.  Munshi, M.M. Rahman, Double diffusive mixed convection in a channel with a circular heater, 5th BSME International Conference on Thermal Engineering, 21-23 Dec., Dhaka, Bangladesh.
  3. M. Jahirul Haque Munshi,  Md. Abdul Alim, Magnetohydrodynamic mixed convection in lid-driven porous square enclosure filled Coper-water Nanofluid with eccentric elliptic body and constant flux heat source on bottom wall, International Conference on Nanotechnology and Condensed Matter Physics 2018 (ICNCMP 2018) January11–12, 2018, BUET –Dhaka, Bangladesh.
  4. M. Jahirul Haque Munshi,  M. A. Alim, Hydrodynamic Mixed Convection Nanofluid flow in a lid- driven porous square cavity including elliptic shape heated block with corner heater, 20th International Mathematics Conference 2017, BMS 2017, University of Dhaka, Bangladesh, 08- 10 December 2017.
  5. Golam Mostafa, M. Jahirul Haque Munshi,  Md. Waliullah, Numerical study on Mixed convection in a lid-driven Benzene shape cavity with corner heater, 20th International Mathematics Conference 2017, BMS 2017, University of Dhaka, Bangladesh, 08- 10 December 2017.
  6. M. Jahirul Haque Munshi, K. F. U. Ahmed, M. A. Alim, MHD MIXED CONVECTIVE NANOFLUID FLOW THROUGH A LID-DRIVEN POROUS MEDIUM U- SHAPED ENCLOSURE, 21st  International Mathematics Conference 2019, BMS 2019, University of Dhaka, Bangladesh, 06- 08 December 2019.
  7. M. Humaun Kabir, M. Jahirul Haque Munshi, Nazma Parveen, Mixed convection Heat transfer of Nanofluid flow in a Lid-driven Porous Rectangular cavity, 21st  International Mathematics Conference 2019, BMS 2019, University of Dhaka, Bangladesh, 06- 08 December 2019.
  8. Mohammad Ali, M. A. Alim, Mohammed Shah Alam, Md. Z. Uddin Chowdhury, M. Jahirul Haque Munshi, Steady forced convection heat and mass transfer analysis of Falkner-skan equation past a permeable moving wedge in a nanofluid in presence of magnetic field, International Conference on Mechanical, Industrical and Energy Engineering, 2016, Khulna, Bangladesh.
  9. M. Jahirul Haque Munshi, M. A. Alim and A. H. Bhuiyan, A numerical study of Magneto-hydrodynamic free convection in a square cavity with heat generating elliptic block, International Conference on Mechanical Engineering (ICME2015) 18- 20 December, 2015 Dhaka, Bangladesh.
  10. M. Jahirul Haque Munshi, M. A. Alim, A. H. Bhuiyan, M. Ali, “Optimization of Mixed convection in a lid-driven porous square cavity with internal elliptic shape adiabatic block and linearly heated side walls”, 7th BSME International Conference on Thermal Engineering, 22-24 December, 2016, BUET, Dhaka, Bangladesh.
  11. Golam Mostafa, M. Jahirul Haque Munshi, Sumon Hossain, and M. Ali, “Analysis of natural convection flow characteristics in a square cavity with internal elliptic shape block”, 7th BSME International Conference on Thermal Engineering, 22-24 December, 2016, BUET, Dhaka, Bangladesh.
  12. M. Jahirul Haque Munshi, M. A. Alim, A. H. Bhuiyan, M. Ali, “Hydrodynamic Mixed Convection in a lid- driven square cavity including heat conducting elliptic cylinder with corner heater”, 10th International Conference on Marin Technology, MARTEC 2016, 9- 10 December, 2016, BUET, Dhaka, Bangladesh.
  13. M. Ali, M. A. Alim, R. Nasrin, M. S. Alam, M. J. Haque Munshi, Similarity Solution of unsteady MHD Boundary Layer flow and heat transfer past a Moving wedge in a Nanofluid using the Buongiorno Model, 10th International Conference on Marin Technology, MARTEC 2016, 9- 10 December, 2016, BUET, Dhaka, Bangladesh.
  14. M. Jahirul Haque Munshi,, M. A. Alim, Raju Chowdhury, Magnetohydrodynamic Mixed Convection in a Double Lid driven Porous Square Enclosure Filled with Copper-water Nanofluid with Heat Generating Elliptic Block, International Conference on Mechanical Engineering (ICME2017) 20- 22, BUET, December, 2015 Dhaka, Bangladesh.
  15. M. Jahirul Haque Munshi1*, K. F. U. Ahmed3, M. Sajjad Hossain2, M. A. Alim3, Numerical simulation of MHD Mixed convection heat transfer of nanofluid in a lid-driven porous medium C-Shaped enclosure, 13th International Conference on Mechanical Engineering (ICME 2019) 18- 20, BUET, December, 2019, Dhaka, Bangladesh.
  16. M. Jahirul Haque Munshi, M. A. Alim, A. H. Bhiyan, M. A. Ali, Numerical simulation of ixed convection heat transfer of nanofluid in a lid-driven porous medium square enclosure, 8th BSME International Conference on Thermal Engineering, 19- 21 December, 2018, BUET, Dhaka. Bangladesh.
  17. Aysharjya Sarker, Abdul Alim, Mohammod Jahirul Haque Munshi, Mohammad Mokaddes Ali, Nmerical study on MHD mixed convection in a lid driven cavity with a wavy top wall and rectangular heaters at the bottom wall, 8th BSME International Conference on Thermal Engineering, 19- 21 December, 2018, BUET, Dhaka. Bangladesh.
  18. M. Human Kabir, M. Jahirul Haque Munshi, Nazma Parveen, M. A. Alim, Numerical study of MHD mixed convection heat transfer of nanofluid in a lid-driven porous rectangular cavity with three square heating blocks, 8th BSME International Conference on Thermal Engineering, 19- 21 December, 2018, BUET, Dhaka. Bangladesh.
  19. Abdul Halim Bhiyan, M. Jahirul Haque Munshi, M. A. Alim, Md. Shahidul Alam, MHD Effect on Mixed convection heat transfer of Cu-water nanofluid in a vented Parallelogrammic cavity with Injection or Suction, 8th BSME International Conference on Thermal Engineering, 19- 21 December, 2018, BUET, Dhaka. Bangladesh.
  20. Md. Shahidul Alam, Abdl Alim, Shirazul Mollah, Mohammod Jahirul Haque Munshi, Effect of Rayleigh Number Magneto-convection in a lid-driven square cavity with a sinusoidal wall, 8th BSME International Conference on Thermal Engineering, 19- 21 December, 2018, BUET, Dhaka. Bangladesh.

  21. Md. Rasel Rana Khandaker, Md. Jahirul Haque Munshi*, Md. Mahmud Alam, Nanofluid flow in a rhombus shaped enclosure filled with porous media, International Conference on the Role of Science and Technology Towards 4IR, University of Rajshahi, Rajshahi- 6205, Bangladesh, 5- 6 October, 2023.  

  22. Md. Jahirul Haque Munshi*, Md. Shahidul Alam, Arju Ara Runa, Abdul Halim Bhuiyan, M. A. Alim, Mixed convection Nanofluid flows in a Porous enclosure due to Source-sinks pairs, The 9th BSME International conference on thermal Engineering,  BUET, Dhaka, Bangladesh, 19_21 December, 2024.

  23. Romana Yesmin, Md. Jahirul Haque Munshi*, Muhammad Sajjad Hossain, Mixed convection heat transfer of nanofluid in a porous L-shaped enclosure, The 9th BSME International conference on thermal Engineering,  BUET, Dhaka, Bangladesh, 19_21 December, 2024.

Supervision Thesis/Project at undergraduate [B. Sc. (Honours) in Mathematics] Level since the last appointment:

  • Effect of a Magneto hydrodynamic Natural convection in a square cavity with internal elliptic shape heated block, Md. Imam Hasan,  2017.

  • Magneto hydrodynamic free convection in a triangular cavity with internal circle shape heated block, Mahmuda Akter, 2017.

  • Numerical study on mixed convection in a lid-driven Hexagonal cavity with corner heater, Md. Waliullah, 2018.

  • MHD Mixed convection in a lid-driven square enclosure with internal heat generating elliptic block and linearly heated side walls., Md. Soher Rana, 2018.

  • Numerical Simulation of MHD effect on Natural convection in a L-shaped enclosure, Mohammad Abdul Alim, 2019.

  • Numerical Simulation of MHD effect on Natural convection in a U-shaped enclosure, Anamika CHowdhury and Ekramul Islam Sayem, 2019.

  • Numerical study on Magneto hydrodynamic Natural convection in a T-shaped cavity with heat source, Iffat Ara and Md. Kamrul Hasan, 2019.

  • Effect of inlet and outlet positions on MHD mixed convection in a ventilated square room with square heated block, Md. Yusof Ali, 2019.

  • Natural convection in a square room with heat flux on bottom wall, Abdullah- Al- Mamun, 2020.

  • Hartmann number effects of inlet and outlet positions on natural convection in a door and ventilated room, Sakibul Alam Shohag, 2020.

  • Natural convection in a horizontal channel with an open enclosure, Fatema Akter & Romana Sultana, 2021.

  • Rayleigh number effects on natural convecton in a square enclosure with heated fin, Muhammad Abdullah Al Mahmud and Md. Forhad Alam, 2021.

  • Numerical simulation of free convection in porous media using COMSOL Multiphysics software, Suraiya Akter Ritu & Tanvir Hasan Shohag, 2021.

 

Supervision Thesis at graduate (M. Sc.) Level since the last appointment:

  • Richardson number variation on mixed convection heat transfer in a square enclosure with heated fin: numerical modeling, Mohammad Abdul Alim, 2022.
  • Richardson number variation on mixed convection heat transfer in a c-shaped enclosure: numerical modeling,  Anamika Chowdhury, 2022.
  • Richardson number variation on mixed convection heat transfer in a u-shaped enclosure: numerical modeling, Ikramul Islam Sayem, 2022.


Copyright © Hamdard University Bangladesh. All Rights Reserved.
Visitors: 266,615
Designed & Developed By: Department of CSE